Interlogix NS3502-8P-2S User Manual Manual do Utilizador descarregar pdf (Página 144)

100

101

IFS NS3502-8P-2S User Manual

144

 Disabled – the port only responds to network management messages and must return to the

blocking state first

A port transitions from one state to another as follows:

 From initialization (switch boot) to blocking

 From blocking to listening or to disabled

 From listening to learning or to disabled

 From learning to forwarding or to disabled

 From forwarding to disabled

 From disabled to blocking

Figure 4-7-1: STP Port State Transitions

You can modify each port state by using management software. When you enable STP, every port on

every switch in the network goes through the blocking state and then transitions through the states of

listening and learning at power up. If properly configured, each port stabilizes to the forwarding or

blocking state. No packets (except BPDUs) are forwarded from, or received by, STP enabled ports until

the forwarding state is enabled for that port.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 567 568

Comentários a estes Manuais

Sem comentários

Interlogix NS3502-8P-2S User Manual Manual do Utilizador Página 144

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios de comunicações Interlogix NS3502-8P-2S User Manual