Interlogix Simon XT Tabletop User Manual Manual do Utilizador descarregar pdf (Página 49)

Simon XT TableTop Control Panel User Manual 43

Device

To trip device

Smoke sensor

Press and hold the test button until the system sounds transmission

beeps.

Wireless panic button

Press and hold the appropriate panic button for three seconds.

Keyfob

Press and hold lock and unlock simultaneously for three seconds.

Remote handheld

touchpad

Press and hold the two emergency buttons simultaneously for three

seconds.

Simon XT TableTop

touchpad

Press the lights off button six times in rapid succession.

Testing communication

Test communication between your system and the central monitoring station or a

voice report destination at least once per week to make sure you have the proper

telephone connection.

Note: The system must be in disarm mode.

To test system communication, do the following:

1. Scroll to System tests and press Enter.

2. The display shows Enter code. Enter the master code and press Enter.

3. The display shows Sensor test. Scroll to Comm test and press Enter.

4. The display shows Comm test is on.

5. After the communication test is successful, the display shows Comm test OK.

6. Press Status repeatedly to exit.

Note: If your system is not connected to a central monitoring station and you do

not have a voice report destination programmed, you won’t be able to perform

the communication test.

If the communication test is successful, the system displays Comm test OK. If the test is

unsuccessful, the Status button will light and within ten minutes the panel will display

Comm failure. If a communication test fails, call your security system dealer.

Note: During a two-way voice session, additional alarms will be indicated at the

panel immediately and reported to the Central Station as soon as the session

ends.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 57 58

Sem comentários

Interlogix Simon XT Tabletop User Manual Manual do Utilizador Página 49