Interlogix TruVision IP Open Standards Box User Manual Manual do Utilizador

TruVision IP Cam Open-Standards User Manual P/N 1076513A-EN • REV 1.0 • ISS 07OCT11

1BChapter 2: Installation Connections A qualified service person, complying with all applicable codes, should perform all required hardware installati

1BChapter 2: Installation Figure 4: External alarm output Accessing the SDHC card Insert an SDHD car dup to 32GB for local storage as a backup in c

1BChapter 2: Installation 4. Connect the cables to the camera. See “Connections” on page 6. 5. Set up the camera’s network and streaming parameters

1BChapter 2: Installation 7. Adjust the camera position and angle as required. 8. Connect a lens to the camera. For optimal performance, use an au

1BChapter 2: Installation 10 TruVision IP Cam Open-Standards User Manual

Chapter 3 Network and streaming configuration This chapter explains how to configure the camera network settings. The cameras can be configured and

2BChapter 3: Network and streaming configuring 4. Change the ActiveX controls and plug-ins options to Enable and click OK. - or - Under Reset Custom

2BChapter 3: Network and streaming configuring Windows Vista and 7 users Internet Explorer for Windows Vista and Windows 7 operating systems have in

2BChapter 3: Network and streaming configuring Click OK. The Web browser screen appears in live mode. Note: You can stop and start live view by clic

2BChapter 3: Network and streaming configuring Figure 6: Web browser interface Item Name Description 1. PTZ controls For future use. 2. Live vi

Copyright © 2011 UTC Fire & Security. All rights reserved. Trademarks andpatents Interlogix, TruVision names and logos are trademarks of UTC F

2BChapter 3: Network and streaming configuring Item Name Description 13. Video image settings Click the required icon in the pop-up window and the

2BChapter 3: Network and streaming configuring Figure 7: Example of a configuration screen (Local configuration shown) Configuration panel Menu scr

2BChapter 3: Network and streaming configuring Parameters Description Save captured picture as Specifies the directory for saving snapshot files.

2BChapter 3: Network and streaming configuring Configuration folders Description Serial settings Defines the RS-485 and RS-232 communication sett

2BChapter 3: Network and streaming configuring Figure 9: Network subfolder screen (to be updated - no NFS) Table 4: Network parameters Parameters De

2BChapter 3: Network and streaming configuring To define the network parameters: 1. In the “Network Parameters” folder click the Network setting su

2BChapter 3: Network and streaming configuring 22 TruVision IP Cam Open-Standards User Manual Figure 10: RS-485 setting menu Note: When a parameter

Chapter 4 Camera configuration This chapter explains how to configure the camera through a Web browser. You must have administrator rights on your P

3BChapter 4: Configuring the camera All changes made apply only to the camera being configured. Parameters cannot be copied to another camera. Note:

3BChapter 4: Configuring the camera 5. Select the time format from the Time format list box. Formats include: 24-hour and 12-hour. 6. Select a dis

Content Chapter 1 Introduction 1 Product overview 1 Features 1 Chapter 2 Installation 3 Installation environment 3 Package contents

3BChapter 4: Configuring the camera 4. Click Save to save changes. Alarm parameters Use this menu to select how external alarm inputs and alarm output

3BChapter 4: Configuring the camera 5. Click Save to save changeote: The camera will prompt you to reboot in order for the schedule changes to Alar

3BChapter 4: Configuring the camera Figure 13: Deployment time menu To define an event schedule: 1. Click the “Deployment” folder to open its screen

3BChapter 4: Configuring the camera Figure 14: Video setting menu Parameter Description Channel name Name of the camera Encoding parameters Speci

3BChapter 4: Configuring the camera Parameter Description Frame rate Specifies the frame rate for the selected resolution. The frame rate is the num

3BChapter 4: Configuring the camera 5. If you selected “All day recording”, select one of the record types to record from the drop-down list box:

3BChapter 4: Configuring the camera Select the level of sensitivity to motion as well as the target size so that only objects that could be of interes

3BChapter 4: Configuring the camera To define the motion detection areas and response method: Note: The deployment and motion detection recording sc

3BChapter 4: Configuring the camera Email link Sends an e-mail to a specified address when there is a motion detection alarm. See “Network parameters

3BChapter 4: Configuring the camera Figure 16: Camera image settings menu (4CIF camera screen shown) Parameter Description Brightness Video satur

ii TruVision IP Cam Open-Standards User Manual Chapter 6 Camera operation 43 Logging on and off 43 Live mode 43 Playing back recorded video

3BChapter 4: Configuring the camera 36 TruVision IP Cam Open-Standards User Manual Parameter Description WDR level 1 WDR level 2 4CIF camera models o

Chapter 5 Camera management This chapter describes how to use the camera once it is installed and configured. The camera is accessed through a Web b

4BChapter 5: Camera management Note: Keep the admin password in a safe place. If you should forget it, contact technical support. You can control who

4BChapter 5: Camera management 7. Click OK to save the changes and return to the main “User management” screen. To delete a user: 1. Click the User

4BChapter 5: Camera management To format the SDHC card: 1. Click the HDD Management folder to open its screen. 2. Click Select All in the HDD Number

4BChapter 5: Camera management To upgrade the firmware through the Web browser: 1. Download on to your computer the latest firmware from our web si

4BChapter 5: Camera management 42 TruVision IP Cam Open-Standards User Manual

Chapter 6 Camera operation This chapter describes how to use the camera once it is installed and configured. Logging on and off You can easily logi

5BChapter 6: Camera operation Adjusting the image quality Click the image quality button in the live mode screen to get a pop-up window that lets you

5BChapter 6: Camera operation Figure 19: Playback screen Item Name Description 1. Playback button Click to open the Playback screen. 2. Full sc

Chapter 1 Introduction Product overview This is the user manual for TruVision IP Cam Open-Standards camera models: - TVC-N220-1-N(-P) (VGA) - TVC-

5BChapter 6: Camera operation Item Name Description 11. Recording type The color code displays the recording type. Recording types are schedule rec

5BChapter 6: Camera operation Figure 20: Log screen 1. Logs type 4. Start search 2. Date search 5. Export log. Save selected logs to your c

5BChapter 6: Camera operation To search logs by type: 1. Click Log in the menu toolbar to display the Log screen. 2. In the Log Type drop-down list s

5BChapter 6: Camera operation 2. Repeat step 1 to create additional segments. You can generate up to 30 additional segments. The video segments are

5BChapter 6: Camera operation 50 TruVision IP Cam Open-Standards User Manual

Appendix A Specifications Electrical Voltage input 12 VDC, PoE (IEEE 802.3af) Power consumption 4.5 W max. TVC-N220-1-N(-P), TVC-M2220-1-N(-P)

6BAppendix A: Specifications 52 TruVision IP Cam Open-Standards User Manual

Appendix B Pin definitions There are eight wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation an

7BAppendix B: Pin definitions 54 TruVision IP Cam Open-Standards User Manual Please make sure your connected cables have the same pin assignment and

Appendix C Warranty and contact information Warranty information The warranty period for the TruVision IP Cam Open-Standards is three years from the

0BChapter 1: Introduction 2 TruVision IP Cam Open-Standards User Manual  

8BAppendix C: Warranty and contact information 56 TruVision IP Cam Open-Standards User Manual

Index A Alarm configuration, 26 restore, 40 Device information display, 19 Display information on-screen response method, 26 set up, 24 Alarm inputs

Index M Motion detection configuring, 31 marking the detection areas, 33 N Network parameters, 19 Network protocol setup, 17 Network settings configur

Chapter 2 Installation This chapter provides information on how to install the cameras. Installation environment When installing your product, consi

1BChapter 2: Installation Package contents Check the package and contents for visible damage. If any components are damaged or missing, do not attempt

1BChapter 2: Installation Camera description Figure 1: Camera dimensions Figure 2: Side elevation of the camera 1. Bracket mounting holes. Can b