Interlogix NX-8V2 User Manual Manual do Utilizador

NetworX NX-8V2 LED Keypad User Manual

8 Step 3  Press the [STAY] key.  The stay light will illuminate indicating that all interior zones are bypassed. (All interior devices will bypass

9 CANCEL / ABORT FEATURE (Optional, see page 1) The cancel light will flash during an abort delay time. If a code is entered followed by the [CANCE

10 CHANGING USER CODES Step 1 Your system must be in the Disarmed state to change user codes. Step 2 Press []-[5]. Step 3 Enter a “Master Arm/Di

11 LIGHT AUTHORITY LEVELS IF LIGHT 8 IS OFF 1 Reserved (Note: Do not change if on.) 2 Arm Only 3 Arm Only After Closing Time 4 Master Arm/Disar

12 OTHER KEYPAD FUNCTIONS SETTING THE KEYPAD TONE Step 1 Press []-[0]. Keypad is now in the “Adjust Tone” mode. Step 2 Pressing the [1] key wi

13 Step 2 Each time a zone is faulted, the zone light on the LED keypad will illuminate and the chime will sound. The number of the faulted zone(s) w

14 Step 4 Enter the “minutes code” which must be two (2) digits. Example: 7 minutes after would be entered [0]–[7].

15 Time Hour Code Time Hour Code Time Hour Code12:00 Midnight 00 8:00 AM 08 4:00 PM 16 1:00 AM 01 9:00 AM 09 5:00 PM 17 2:00 AM 02 10:00 A

16 SERVICE MENU The service light will be “on” if the security system requires service. If the service light is “on”, press the [] key followed by

17 EMERGENCY EVACUATION PLANS An emergency evacuation plan should be established for an actual fire alarm condition. For example, the following step

POWER Light is “on” when AC power is present; flashes to indicate a low battery condition. READY Light is “on” when the system is ready to arm; flash

18 SYSTEM NOTES

© 2011 UTC Fire & Security. All rights reserved. NX-8V2 USER’S MANUAL INX8V2OM Rev B (June 2011)

1 SECURITY SYSTEM NOTES Installing/Service Company _________________________________ For Service Call __________________________________________ C

2 THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF YOUR SECURITY SYSTEM SHOU

3 TABLE OF CONTENTS GLOSSARY OF TERMS ...4 UNDERSTANDING THE LIGHTS...

4 GLOSSARY OF TERMS Abort Delay: An option that allows a delay in reporting to the central station. There is a communicator delay of 30 seconds. It

5 UNDERSTANDING THE LIGHTS Armed Light The armed light is “on” when the system is armed. The armed light is “off” when it is disarmed. The armed li

6 Ready Light The ready light is “on” when the system is ready to arm and “flashes” if ready to force arm. The ready light is off when the system is n

7 KEYPAD FUNCTIONS ARMING YOUR SYSTEM IN THE “AWAY” MODE AWAY is used when the user is away from the premise and wants the interior protected. Listed