Interlogix Simon XT Installation Manual Manual do Utilizador descarregar pdf (Página 66)

60 Simon XT Installation Manual

If the test is unsuccessful, the Status button lights and the display shows Comm

Failure within 10 minutes.

If the test is unsuccessful:

1. Check that the panel is connected to the phone jack.

2. Check the phone number programmed into the panel.

3. Perform the communication test again.

4. If the communication test fails again, check the phone connection wiring.

Offsite phone operation

Test the system from a remote phone by calling the panel and using the

commands in Table 30 below.

Table 30: Phone commands

System function

Phone command

Disarm

Arm doors/windows

Arm motion sensors

Arm doors/windows with no entry delay

2 2

Arm motion sensors with latchkey

3 3

Arm doors/windows and motion sensors

2 3

Arm doors/windows with no entry delay and

motion sensors with latchkey

2 2 3 3

Specific light on

*, <unit number>

Specific light off

#, <unit number>

All lights on

* *

All lights off

# #

System status

Audio verification

5 plus X (X= a command from Audio

Verification Set)

Terminate session

Central station communication

After performing sensor and communication tests, check that the system is

reporting alarms successfully to the central station. Table 31 on page 61 provides

a list of sensor/user report codes.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72 73 74

Comentários a estes Manuais

Sem comentários

Interlogix Simon XT Installation Manual Manual do Utilizador Página 66

Comentários a estes Manuais

Manuais e produtos relacionados com Painel de controlo Interlogix Simon XT Installation Manual