Interlogix NX-6V2 User Manual Manual do Utilizador descarregar pdf (Página 15)

zone(s) will be displayed on the LCD keypad. It will also be

entered into alarm memory and the internal log.

Step 3 The keypad will begin to beep after 15 minutes in this mode. This

beeping indicates that the “Walk-Test” mode will be automatically

exited in 5 minutes.

Step 4 To exit at any time during this mode, enter a user code. Otherwise

the AWalk-Test Mode@ will automatically exit after 20 minutes.

RESET FUNCTION

This function is used to reset Smoke Detectors, Zone Troubles, and Zone

Tampers.

Step 1 Disarm the system if not disarmed.

Step 2 Press [ ]-[7]. Resets have now been performed.

Step 3 If the keypad begins beeping, the reset did not execute properly.

Enter your code to silence the keypad. Wait a few minutes and

repeat step 2 to attempt another reset. If the keypad still beeps after

repeated attempts, please contact your installer.

SET SYSTEM DATE

Step 1 Press the [ ]-[9]-[6].

Step 2 Enter the “Master Code”.

Step 3 Enter the “Day of Week “

1 = Sunday 3 = Tuesday 5 = Thursday 7 = Saturday

2 = Monday 4 = Wednesday 6 = Friday

Step 4 Enter the “Month Code”. Must always be two (2) digits.

01 = January 05 = May 09 = September

02 = February 06 = June 10 = October

03 = March 07 = July 11 = November

04 = April 08 = August 12 = December

Step 5 Enter the “Day Code”. Must always be two (2) digits.

Example: The 5

would be entered as [0]–[5].

Step 6 Enter the last two digits of the “Year Code”.

Example: For 2007 enter [0]–[7].

SETTING THE SYSTEM CLOCK

Step 1 Press [ ]-[9]-[7].

Step 2 Enter the “Master Code “.

Step 3 Enter the “hour code” which must be two (2) digits. Note: The

clock is a 24-hour clock. Refer to the following table on page 14.

Step 4 Enter the “minutes code” which must be two (2) digits.

Example: 7 minutes after would be entered [0]–[7].

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Interlogix NX-6V2 User Manual Manual do Utilizador Página 15